Vortech Universal Big Block Carbureted System Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
P/N: 4GA020-030
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
08DEC08 V3.0(BBC LowMount(4GA..030 V3.0))
6
G. Install the supplied 1/8"NPT x 90° x #4 fitting
into the supercharger oil feed nozzle. Do not
use teflon tape on the threads or oil feed
blockage may result.
H. Carefully route the previously installed oil feed
hose up to the supercharger oil feed fitting
taking care not to kink the hose. Carefully
thread the hose end onto the feed fitting.
LIGHTLY LUBRICATE THE FITTING WITH
ENGINE OIL.
CAUTION: Ensure that the oil supply system is
free of contamination that might plug
the supercharger oil inlet orifice. Hold
the supercharger oil feed fitting with
wrench while tightening the oil feed
line fitting.
5. SUPERCHARGER MOUNTING, CONT'D (TWIN PlATE v-7 ONlY, v-4 SKIP TO
SECTION 8)
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentarios a estos manuales

Sin comentarios